How to install SPC Reducer ?

Reducers are used to transition from flooring to floors of different height with

a minimum height difference of 1/4 inch.

Installation Instructions

Step 1

Install the flooring planks including the underlayment

by leaving a 1”-1.2″ inch (25-30mm)from the vinyl

and step edge for the installation of the stair nose

Step 2

Center the U-Track and Shim between the space floors and and step edge. screw them to the sub floor by using screws.

Step 3

Gently press the molding into the track starting from one end to the other just like you would close a Zip-Lock bag.1”!!! Do not try to push the entire molding in all at once .by just pressing it in from top !!!


Consult Your Molding Experts

We help you avoid the pitfalls to deliver the quality and value you need, on-time and on-budget.